Our ordering system is handled by Paypal and you can pay with any major credit card or make a bank transfer on checkout. You do not have to become a member to make a payment with Paypal.
Ordering - Shipping Policies/Information
Will ship same day or next day if parts in stock.
Special Note - ALL foreign orders must include the appropriate foreign order added shipping charge. Orders that do not include the added charge will be delayed while we contact you to pay the added fee.
Foreign Order Shipping Charge for Items under 1 lb. (Individual Shims, Shim Measuring Tools)
$8
Foreign Order Shipping Charge for Items over 1 lb. (Shim kits, Manuals, Large Tools)
$25
Shim Kits
2V Shim Kit (8 mm valves) $299.00
(for all 2V except 1000 DS, Multistrada, Hypermotard and 07’ and later models)
36 SHIMS TOTAL
Closers- 15 Shims, from 6.20 mm to 7.60 mm in .10 mm increments
Openers- 21 Shims, from 3.00 mm to 5.00 mm in .10 mm increments
Spacer tool provided to measure size of closer shims
36 compartment storage case
Multi-model Shim Kit for all 4V and 1000cc 2V, Multistrada, Hypermotard, ST-3 and all 07’ and later models (7 mm valves) $339.00
36 SHIMS TOTAL
Closers- 19 Shims, from 2.65 mm to 3.55 mm in .05 mm increments
Openers-17 Shims, from 2.45 mm to 3.25 mm in .05 mm increments
Spacer tool provided to measure size of closer shims
36 compartment storage case
4V Shim Kit (7 mm valves) with Modified Open Shims Used with MBPDVRS $379.00
19 closer shims and 25 modified opener shims.
Includes 1 ea of 19 closer shims from 2.65 through 3.55 mm in .05 mm increments
1 ea opener shims from 2.45 -2.70 mm and 3.15 -3.25 mm and 2 ea 2.75 - 3.10 mm.
(The opener shims have a slight counterbore in the bottom to accept the retainers.)
Includes closer measurement tool and plastic case
DESMO VALVE RETAINING SYSTEM AND KIT COMBOS
The use of the MBP desmo valve retaining systems have the following benefits:
Lengthens the time between valve adjustments
Are stronger than stock half ring systems
Can handle higher rpms for longer periods of time as compared to the stock half ring systems.
2V systems works with stock shims except on bevel drive motors.
For more information on the DVRS, see the MBP Factory WebSite
4V Modified Shim Kit (7 mm valves) with modified opener shims and 16 ea MBPDVRS $599.00
4V Modified Shim Kit (7 mm valves) with 12 ea MBPDVRS for ST-3 $526.00
2V Shim Kit (8 mm valves) with 8 ea MBPDVRS $415.00
Shim Kit (7 mm valves) with 8 ea MBPDVRS for 7 mm valves $444.00
2V MBPDVRS, 8 mm valves, 1 set, 8 ea $125.00
8 mm Diameter Valves
Includes 8 Retainers (2 ea for 4 valves) Works with OEM shims
2V MBPDVRS, 7 mm valves, 1 set, 8 ea $125.00
3V MBPVRS, 1 set, 12 each
$187.50
For ST3, includes 12 Retainers (2 ea for 6 valves)
4V MBPVRS, 1 set, 16 each $250.00
for 7 mm Diameter Valves
Specialty Tools
2V Closer Measurement Tool, 8 mm $11.50
4V Closer Measurement Tool, 7 mm $11.50
Ducati 4V Organizer
$19.50
Designed for 4V Ducatis, but can be used for 3V and 2V bikes. A must have for doing valve adjustments on your 4V Ducati. Each valve assembly has its own place for shims, retainers, rocker spindles, and rocker arms. Assures each part is put back in the same location. Recommended valve adjustment and torque specs written on center of inside cover for all 4V bikes. High quality plastic case. Includes handy valve clearance calculation sheet.
Rocker Arm Depressor Tool
$32.00
Tool designed to depress the closing rocker on all 2V and 4V Ducatis. Tool fits easily into the palm of your hand. Has blunt end so as not to damage valve seal at the base of the valve stem. Thin walled, 4140 steel, to catch the edge of the closing rocker arm. Non-slip design. Not needed for Testestretta Motors (998, 999, 749, 1098, 848). Made in USA.
Rocker Arm Spindle Puller/Slap Hammer
$44.00
This tool is used to pull the rocker spindles out 4V Ducatis. A must for Desmoquattro valve adjustments. It is a slap hammer design, since the spindle is easy to remove with a few taps. 5 mm end threads into the end of the spindle. Very quick and easy to use. Not for Testestretta Motors. Made in the USA of 4140 high grade steel.
LT Snyder Maintenance Guide for 2V Ducatis, includes: Monster, Supersport, Multistrada, ST2, ST3 and Gran Canyon
$35.00
Includes all maintenance procedures including valve adjustment.
LT Snyder Maintenance Guide for 4V Ducatis, includes: 851, 888, 748, 916, 996, 998, 749, 999, S4, S4R, ST4, and ST4s
Includes all maitenance procedures including valve adjustment.
$35.00
Individual Shims and Ducati OEM Half Ring Retainers - use popup to indicate size
Please indicate in the field below the year and model of Ducati that you are ordering individual shims/parts for. To send this information to us, add the line to your order. There is no charge.
Example 2009 1098 or 2008 HyperMotard
Ducati OEM Half Ring 7 mm
$4.75 each
Ducati OEM Half Ring 8 mm
$3.75 each
2V Opener Shims (8 mm valves) $8.50 each
shims measured in millimeters
from 2.00 mm to 2.80 mm (.10 increment), 2.85 to 5.00 mm (.05 increment), 5.10 mm to 6.00 mm (.10 increment).
- shims measured in millimeters
2V Closer Shims (8 mm valves) $9.50 each
Closers from 5.50 mm to 6.20 mm (.10 increment), 6.25 mm to 7.55 mm (.05 increment), 7.60 mm to 8.00 mm (.10 increment.
- shims measured in millimeters
4V Opener Shims, 7 mm $8.50 each
2.00- 3.45 mm in .05 mm increments
4V Modified Opener Shims, 7 mm $8.50 each
- modified to work with 4V MBPVRS
2.00- 3.45 mm in .05 mm increments
4V Closer Shims, 7 mm $9.90 each
2.45- 4.25 mm in .05 mm increments
